Euro Triangle

 

I have been assimilated into the herd... This is the Ian Fritz triangle VCO that I did a few years ago as a Eurorack module. Well at least I have the front panel done at the same time which was a bit of an issue before! Will see how this progresses!

Analogue Board

Well the Digital board is working fairly well... well enough for me to bother starting on the Analogue board anyway. Problems with the Digital board are the usual Z80 issues with stable clocks and making sure that we have a long reset pulse. The new CMOS Z80 doesn't seem very interested in running but the old NMOS one is OK. There is a resistor missing from the UART/opto isolator circuit but with the addition of the resistor it all seems OK and the NMI works and the CPU collects the data. I have Ruby script to feed in the SYSEX settings but really need the Battery backup in place first. The Analogue board has had a couple of small tweeks like a switch mode regulator instead of the rather brutal original linear one and a negative 5V generator so a simple DC wall wart will suffice through a standard barrel connector. I was thinking that the filter design could be redone for a Shruthi filter board... maybe one day...

Getting There... slowly...

The Panel PCB has returned from JCL and under the circumstances was pretty quick! Some hard to find parts came from eBay and some new, but a bit tarnished, parts have come from Digikey. The digital board seems to run OK and has HCT TTL parts to try and lower the power consumption a bit. Need to program up the EPROM so I can do some more testing...

50ck3t5 all the way...

Well the PCB is back and I have decided to socket everything so I can experiment with newer logic families and CMOS versions of the VLSI. The front panel PCB is dragging a bit...